TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1047 of 1558
TM 9-2320-366-20-4 15-5. REAR STABILIZER BAR REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Trestle, Motor Vehicle Maintenance (2) (Item 47, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C) Socket, Socket Wrench (Item 70, Appendix B) Wrench Set, Socket (Item 50, Appendix C) Materials/Parts Solvent, Dry Cleaning (Item 65, Appendix D) Grease, Automotive and Artillery (GAA) (Item 22, Appendix D) Nut, Self-Locking (4) (Item 162, Appendix G) Nut, Self-Locking (8) (Item 154, Appendix G) Nut, Self-Locking (8) (Item 156, Appendix G) Nut, Self-Locking (2) (Item 160, Appendix G) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Left and right sides of rear stabilizer bar are disconnected the same way. Right side shown. (1) Position trestles under rear stabilizer bar (1). 15-9