TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1046 of 1558
TM 9-2320-366-20-4 15-4. REAR AXLE SHOCK ABSORBER REPLACEMENT (CONT) (3) Extend or compress rear axle shock absorber (1) length to align with holes in upper bracket (2). NOTE Perform steps (4) and (5) on vehicle serial numbers 1399 through 2987. (4) Position rear axle shock absorber (1) in upper bracket (2) with three washers (7), bolt (8), and self-locking nut (9). (5) Tighten self-locking nut (9) to 195-239 lb-ft (264-324 N·m). NOTE Perform steps (6) and (7) on vehicle serial numbers 0001 through 1398, and 2988 and higher serial numbers. (6) Position rear axle shock absorber (1) in upper bracket (2) with washer (10), bolt (8), and self-locking nut (9). (7) Tighten self-locking nut (9) to 195-239 lb-ft (264-324 N·m). End of Task. 15-8