TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1041 of 1558
TM 9-2320-366-20-4 Change 2 15-3 h. Front Leaf Spring Resilient Mount Installation (1) Install C-Clamp on leaf spring (1). (2) Apply sealing compound to threads of bolt (2). (3) Position spacer (3) and resilient mount (4) on bolt (2). (4) Tighten resilient mount (4) 1 ½ turns after contact with plate (5) (5) Remove C-Clamp from leaf spring (1). i. Follow-On Maintenance. Lower cab (for front angle bracket resilient mount) (TM 9-2320-366-10-1). End of Task. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE If vehicle has resilient mounts attached with screws and washers, notify DS to install four kits P/N 57K2003 on vehicle.