Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 1039 of 1558

TM 9-2320-366-20-4 Change 2 15-2.1 c. Resilient Mount Removal. (1) Position mechanical stop (1) in vise. (2) Remove nut (2), spring washer (3), bolt (4), and resilient mount (5) from mechanical stop (1). Discard spring washer. (3) Remove enhanced resilient mount (6) and bolt (2) from mechanical stop (3). d. Resilient Mount Installation. (1) Enlarge mounting hole on mechanical stop (1) to 0.6 in. (15 mm). (2) Position resilient mount (5) on mechanical stop (1) with bolt (4), spring washer (3), and nut (2). (3) Tighten nut (2) to 35-46 lb-ft (47-63 N•m). (4) Remove mechanical stop (1) from vise. NOTE Perform step (2) on vehicles not equipped with enhanced resilient mounts. NOTE Perform step (3) on vehicles equipped with enhanced resilient mounts. NOTE Perform step (1) on vehicles not equipped with enhanced resilient mounts.