TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1034 of 1558
TM 9-2320-366-20-4 14-104 Change 2 14-14. M1088 PLATFORM AND BRACKETS REPLACEMENT/REPAIR (MODIFIED) (CONT) c. Platform Disassembly. Remove three self-locking nuts (1), screws (2) and floor plate (3) from platform (4). Discard self- locking nuts. Table 14-1. M1088 Platform Attaching Hardware PLATE A B C D E F G H NUMBER OF SELF- LOCKING NUTS 4 3 4 4 4 4 5 4 NUMBER OF SCREWS 4 3 4 4 4 4 5 4 d. Platform Assembly. (1) Position floor plate (1) on platform (2) with three screws (3) and self-locking nuts (4). (2) Tighten three self-locking nuts (4) to 20-30 lb-ft (27- 41 N•m). NOTE Number of fasteners will vary from floor plate to floor plate. Refer to Table 14-1, M1088 Platform Attaching Hardware for number of fasteners required. Floor plate B shown. NOTE Number of fasteners will vary from floor plate to floor plate. Refer to Table 14-1, M1088 Platform Attaching Hardware for number of fasteners required. Floor plate B shown.