TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1007 of 1558
TM TM 9-2320-366-20-4 9-2320-366-20-4 14-10. M1088/M1089/M1090/M1094 SPARE TIRE RETAINER REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Spare tire removed (TM 9-2320-366-10-2). Cab raised (TM 9-2320-366-10-1). Cab leveling valve removed (para 16-8). Air/hydraulic power unit and bracket removed (para 19-3). Ether starting aid removed (para 4-15). Shunt removed (para 7-29). 100 amp reverse polarity relay removed, if equipped (para 7-30). 200 amp reverse polarity relay removed, if equipped (M1094) (para 20-47). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Pan, Drain (Item 24, Appendix C) Tools and Special Tools (Cont) Gloves, Rubber (Item 13, Appendix C) Goggles, Industrial (Item 15, Appendix C) Socket Set, Socket Wrench (Item 36, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Cap and Plug Set (Item 14, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Nut, Self-Locking (8) (Item 167, Appendix G) Nut, Self-Locking (12) (Item 156, Appendix G) Nut, Self-Locking (Item 128, Appendix G) Pin, Cotter (2) (Item 231, Appendix G) Personnel Required (3) a. Removal. (1) Remove four self-locking nuts (1), eight washers (2), and four screws (3) from spare tire retainer (4). Discard self- locking nuts. (2) Remove four self-locking nuts (5), eight washers (6), and four screws (7) from spare tire retainer (4). Discard self- locking nuts. 14-77 14-77