TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 991 of 1396
TM 9-2320-366-20-3 e. Adjustment. NOTE Vehicle must be empty when making headlight adjustment. (1) Connect batteries (para 7-57). (2) Position vehicle on level surface with both headlights approximately 36 in. (91 cm) from headlight adjustment screen with vertical lines (1) directly in front of bumper ends (2). (3) Turn headlights on LOW beam (TM 9-2320-366-10-1). (4) Observe headlight spots on headlight adjustment screen. If headlight spots are within squares (3), alignment is correct. NOTE Perform steps (5) and (6) if headlights need adjusting. (5) Adjust screw (4) to move headlight spot up or down. (6) Adjust screw (5) to move headlight spot left or right. (7) Turn off headlights (TM 9-2320-366-10-1). End of Task. 7-239