TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 988 of 1396

TM 9-2320-366-20-3 7-41. HEADLIGHT AND HOUSING REPLACEMENT/REPAIR/ADJUSTMENT This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Adjustment INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Cab raised (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Headlight Adjustment Screen (Item E-6, Appendix E) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 18, Appendix C) Grommet, Nonmetallic (3) (Item 55, Appendix G) Lockwasher (3) (Item 85, Appendix G) a. Removal. NOTE • Both headlights are removed the same way. Left headlight shown. • Perform steps (1) through (3) to remove lamp only. (1) Remove three screws (1) and retaining ring (2) from housing (3). (2) Remove lamp (4) from housing (3). NOTE • Tag connectors and connection points prior to disconnecting. • Connector numbers are the same on left and right headlights. (3) Disconnect connectors 18, 91, and 17 (5) from housing (3). 7-236