TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 985 of 1396
TM 9-2320-366-20-3 7-40. COMPOSITE FRONT LIGHT ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Cab raised (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Lockwasher (2) (Item 96, Appendix G) Packing, Preformed (Item 191, Appendix G) a. Removal. NOTE Both composite front light assemblies are removed the same way. Left side shown. Tag wires and connection points prior to disconnecting. Connectors for right side are P8, P9 and P10. (1) Disconnect connectors P22, P23, and P24 (1) from composite front light assembly (2). (2) Remove two screws (3), lockwashers (4), three terminal lugs (5), and composite front light assembly (2) from front bumper (6). Discard lockwashers. 7-233