TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 982 of 1396
TM 9-2320-366-20-3 7-39. COMPOSITE TAILLIGHT ASSEMBLY REPLACEMENT/REPAIR (CONT) j. Composite Taillight Assembly Installation (All Models Except M1088/M1089). NOTE • Left and right composite taillights are installed the same way. Left side shown. • Install plastic cable ties as required. (1) Position two lockwashers (1), screws (2), terminal lug TL18 (3), and composite taillight assembly (4) on taillight carrier (5). (2) Tighten two screws (2) to 35-42 lb-ft (48-57 N·m). (3) Connect connectors P74, P76, P77, P78 (6) to composite taillight connectors 22-461, 24, 23, 21 (7). (4) Install clamp (8) on taillight carrier (5) with screw (9) and self-locking nut (10). k. Disassembly. (1) Remove six screws (1), cover (2), and preformed packing (3) from housing (4). Discard preformed packing. (2) Remove two screws (5), bezel (6), lens (7), and retainer (8) from cover (2). 7-230 Change 1