TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 977 of 1396
TM 9-2320-366-20-3 7-39. COMPOSITE TAILLIGHT ASSEMBLY REPLACEMENT/REPAIR This task covers: a. M1088 Composite Taillight Assembly Removal b. M1088 Composite Taillight Assembly Installation c. M1089 Composite Taillight Assembly Removal d. M1089 Composite Taillight Assembly Installation e. Deleted f. Deleted g. Deleted h. Deleted i. Composite Taillight Assembly Removal (All Models Except M1088/M1089) j. Composite Taillight Assembly Installation (All Models Except M1088/M1089) k. Disassembly l. Assembly m. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Wrench Set, Socket (Item 51, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Lockwasher (2) (Item 96, Appendix G) Packing, Preformed (Item 191, Appendix G) NOTE Tag wires and connection points prior to disconnecting. Remove plastic cable ties as required. Right side connectors are P61, P62, P63, P64, 22-460, 24, 23, 21, and TL 21. a. M1088 Composite Taillight Assembly Removal. NOTE Left and right composite taillights are removed the same way. Left side shown. (1) Disconnect connectors P74, P76, P77, P78 (1) from composite taillight connectors 22-461, 24, 23, 21 (2). (2) Remove two screws (3), lockwashers (4), terminal lug TL18 (5), and composite taillight assembly (6) from vehicle. Discard lockwashers. Change 1 7-225