TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 975 of 1396
TM 9-2320-366-20-3 d. Chassis Clearance and Marker Light Installation. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well- ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply adhesive to threads of screw (1). (2) Install screw (1) in base (2) with nut (3). NOTE Clearance and marker lights originally come with cork gaskets. Discard cork gaskets and replace with rubber gaskets PN 12421469. (3) DELETED NOTE Perform step (4) on three center clearance lights on M1084/M1086 and M1089. (4) Install gasket (4) and base (2) on vehicle with four screws (5), washers (6), and nuts (7). NOTE Perform step (5) on three center clearance lights on all models except M1084/M1086 and M1089. (5) Install gasket (4) and base (2) on vehicle with four washers (8), screws (5), washers (6), and nuts (7). Change 1 7-223