TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 956 of 1396
TM 9-2320-366-20-3 7-34. M1089 WRECKER CONTROL PANEL TOGGLE SWITCH REPLACEMENT (CONT) (6) Disconnect conductor splice (19) from two wires (20). (7) Remove conductor splice (21) and EMERGENCY SHUTDOWN toggle switch (18) from wire (22). (8) Remove conductor splices (19 and 21) from EMERGENCY SHUTDOWN toggle switch (18). Discard conductor splices. b. Installation. NOTE Steps (1 through 6) apply to the remaining five toggle switches. Two toggle switches have three electrical connections, the remaining three have only two electrical connections. EMERGENCY SHUTDOWN toggle switch shown. (1) Position insulation sleeving (1) over two wires (2). (2) Position insulation sleeving (1) over wire (3). (3) Install conductor splices (4 and 5) on EMERGENCY SHUTDOWN toggle switch (6). (4) Install conductor splice (5) on wire (3). (5) Install conductor splice (4) on two wires (2). 7-204