TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 951 of 1396
TM 9-2320-366-20-3 (4) Position wires (6) on bottom of terminal blocks (1) as recorded in removal. (5) Tighten screws (7) on bottom of terminal blocks (1). (6) Install channel (3) on winch assembly (8) with two washers (9), screws (10), and self-locking nuts (11). (7) Position five terminal block jumpers (12) on top of terminal blocks (1) as recorded in removal. NOTE Install plastic cable ties as required. (8) Position wires (13) on top of terminal blocks (1) as recorded in removal. (9) Tighten screws (14) on top of terminal blocks (1). Change 1 7-200.1/(7-200.2 Blank)