TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 948 of 1396
TM 9-2320-366-20-3 7-33. M1089 TERMINAL BLOCK REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Material/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Nut, Self-Locking (2) (Item 133, Appendix G) Lockwasher (8) (Item 100, Appendix G) Nut, Self-Locking (2) (Item 128, Appendix G) a. Removal. (1) Remove two self-locking nuts (1), four washers (2), and two screws (3) from top cover (4). Discard self-locking nuts. (2) Remove eight screws (5), lockwashers (6), washers (7), and top cover (4) from control panel (8). Discard lockwashers. NOTE • Remove plastic cable ties as required. • Tag and record wires, terminal block jumpers and connection points prior to disconnecting. (3) Loosen screws (9) on top of terminal blocks (10). (4) Remove wires (11) from top of terminal blocks (10). (5) Remove five terminal block jumpers (12) from top of terminal blocks (10). 7-198 Change 1