TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 913 of 1396
TM 9-2320-366-20-3 NOTE Perform steps (4) through (6) on junction boxes that have not had modification kit installed. (4) Unsolder five wires (5) from shutdown relay (6). WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. (5) Remove three rivets (7) and bracket (8) from junction box (4). (6) Remove three nuts (9), lockwashers (10), washers (11), and shutdown relay (6) from bracket (8). Discard lockwashers. NOTE Perform steps (6.1) through (6.3) on junction boxes that have modification kits installed. (6.1) Disconnect shutdown relay connector (11.1) from shutdown relay (11.2). (6.2) Remove nut (11.3), lockwasher (11.4), washer (11.5), shutdown relay (11.2) and screw (11.6) from bracket (11.7). Discard lockwasher. Change 1 7-166.1/(7-166.2 Blank)