TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 888 of 1396
TM 9-2320-366-20-3 7-27. M1084/M1086 JUNCTION BOX ASSEMBLY REPLACEMENT/REPAIR (CONT) NOTE Perform steps (3) through (6) on junction boxes that have not had modification kit installed. (3) Unsolder five wires (5) from lockout relay (6). (4) Unsolder five wires (7) from shutdown relay (8). WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. (5) Remove six rivets (9) and brackets (10 and 11) from junction box (4). (6) Remove six nuts (12), lockwashers (13), washers (14) and brackets (10 and 11) from shutdown relay (8) and lockout relay (6). Discard lockwashers. 7-146 Change 1