TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 876 of 1396

TM 9-2320-366-20-3 7-25. FLASHER UNIT REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Kick panel removed (para 16-3). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) a. Removal. (1) Remove two screws (1), washers (2), and flasher unit (3) from dashboard (4). (2) Disconnect connector PX20 (5) from flasher unit (3). b. Installation. (1) Connect connector PX20 (5) to flasher unit (3). (2) Install flasher unit (3) on dashboard (4) with two washers (2) and screws (1). c. Follow-On Maintenance. (1) Install kick panel (para 16-3). (2) Connect batteries (para 7-57). (3) Check turn signal and hazard lights operation (TM 9- 2320-366-10-1). End of Task. 7-134