TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 874 of 1396
TM 9-2320-366-20-3 7-24. FAN AND DIFFERENTIAL LOCK SOLENOIDS REPLACEMENT (CONT) (6) Remove two screws (12) and bracket (10) from solenoids (13). (7) Remove 90-degree fitting (6) from solenoids (13). (8) Remove two fittings (8) from solenoids (13). (9) Remove plug (14) from solenoids (13). b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of plug (1), two fittings (2), and 90-degree fitting (3). (2) Install plug (1) in solenoids (4). (3) Install two fittings (2) in solenoids (4). (4) Install 90-degree fitting (3) in solenoids (4). (5) Install bracket (5) on solenoids (4) with two screws (6). 7-132