TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 872 of 1396
TM 9-2320-366-20-3 7-23. M1090/M1094 DUMP BODY SWITCH REPLACEMENT/ADJUSTMENT (CONT) c. Adjustment. WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Ensure exhaust system is cool before performing maintenance. Failure to comply may result in injury to personnel. (1) Loosen screw (1) in mounting plate (2). (2) Position master power switch to on (TM 9-2320-366-10- 1). NOTE Step (3) requires the aid of an assistant. (3) Push up on lever (3) until DUMP BODY UP indicator (4) goes out. (4) Tighten screw (1). (5) Position master power switch to off (TM 9-2320-366-10- 1). d. Follow-On Maintenance. (1) Raise dump body and check that DUMP BODY UP indicator is lit (TM 9-2320-366-10-1). (2) Lower dump body and check that DUMP BODY UP indicator goes out (TM 9-2320-366-10-1). (3) Shut down engine (TM 9-2320-366-10-1). End of Task. 7-130