TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 863 of 1396
TM 9-2320-366-20-3 7-20. STARTER PUSHBUTTON SWITCH REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Instrument panel assembly removed for access (para 7- 15). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) a. Removal. NOTE Tag wires and connection points prior to disconnecting. (1) Disconnect terminal lugs TL162 (1) and TL163 (2) from starter pushbutton switch (3). (2) Remove nut (4), washer (5), and starter pushbutton switch (3) from instrument panel assembly (6). b. Installation. (1) Position starter pushbutton switch (3) in instrument panel assembly (6) with washer (5) and nut (4). (2) Tighten nut (4) to 57-70 lb-in. (6-8 N·m). (3) Connect terminal lugs TL163 (2) and TL162 (1) to starter pushbutton switch (3). c. Follow-On Maintenance. (1) Install instrument panel assembly (para 7-15). (2) Start engine (TM 9-2320-366-10-1). (3) Shut down engine (TM 9-2320-366-10-1). End of Task. 7-121