TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 861 of 1396
TM 9-2320-366-20-3 7-19. START INHIBIT PUSHBUTTON SWITCH REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). PDP cover removed (para 16-2). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) a. Removal. (1) Remove three screws (1) and washers (2) from PDP (3). (2) Remove three screws (4) from PDP (3). (3) Lift PDP (3) outward to gain access. NOTE Tag electrical connectors and connection points prior to disconnecting. (4) Disconnect terminal lugs TL158 (5) and TL159 (6) from start inhibit pushbutton switch (7). (5) Remove spring clip (8) and start inhibit pushbutton switch (7) from PDP (3). 7-119