TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 846 of 1396
TM 9-2320-366-20-3 7-15. INSTRUMENT PANEL ASSEMBLY REPLACEMENT/REPAIR (CONT) NOTE Perform steps (20) through (22) on vehicles equipped with WTEC III transmission controls. (20) Install WTEC III TPSS (29) in instrument panel (2). (21) Position two brackets (30) on rear of WTEC III TPSS (29) with two nuts (31). (22) Tighten two nuts (31) to 11-13 lb-in. (1.3-1.5 N·m). NOTE All electrical gages are installed the same way. FUEL gage shown. (23) Position FUEL gage (32) in instrument panel (2) with mounting ring (33) and two self-locking nuts (34). (24) Tighten two self-locking nuts (34) to 9 lb-in. (1 N·m). (25) Install two protective caps (35) on FUEL gage (32). (26) Perform steps (23) through (25) on remaining gages. 7-104