TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 835 of 1396
TM 9-2320-366-20-3 Change 2 7-93 7-15. INSTRUMENT PANEL ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Steering wheel removed (para 13-2). Inclinometer removed (para 16-29) Dump Switch Bracket removed (para 7-146) Tools and Special Tools Tool Kit, Genl Mech (Item 46 , Appendix C) Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) a. Removal. (1) Loosen screw (1) in HAND THROTTLE knob (2). (2) Remove HAND THROTTLE knob (2) from HAND THROTTLE lever (3). (3) Remove 16 screws (4) and washers (5) from instrument panel assembly (6). (4) Lift instrument panel assembly (6) outward to gain access. NOTE Perform steps (1) through (4) if removing instrument panel assembly for access. NOTE Depending upon pre-conditioned items removed; configuration of instrument panel can have from 12 to 16 screw. Configuration with 16 screws shown.