TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 823 of 1396
TM 9-2320-366-20-3 (10) Install terminal lug TL14 (17) on terminal board TB2 (18) position 12. (11) Install terminal lug TL87 (19) on terminal board TB2 (18) position 6. (12) Remove two nuts (20), lockwashers (21), two washers (22), cover (23), and two washers (22) from terminal board TB1 (24). (13) Install terminal lug TL75 (25) on terminal board TB1 (24) position 2. (14) Install terminal lug TL71 (26) on terminal board TB2 (18) position 2. (15) Install terminal lug TL73 (27) on terminal board TB1 (24) position 1. (16) Install terminal lug TL74 (28) on terminal board TB1 (24) position 3. (17) Install two washers (22) and cover (23) on terminal board TB1 (24) with two washers (22), lockwashers (21), and nuts (20). (18) Install terminal lug TL86 (29) on terminal board TB2 (18) position 4. (19) Remove screw (30), lockwasher (31), and four terminal lugs (32) from PDP (2). (20) Position four terminal lugs (32) and terminal lug TL42 (33) on PDP (2) with lockwasher (31), and screw (30). (21) Tighten screw (30) to 35-45 lb-in. (4-5 N·m). 7-81