TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 798 of 1396
TM 9-2320-366-20-3 7-10. WTEC II DASHBOARD CABLE ASSEMBLY REPLACEMENT/REPAIR (CONT) (5) Install relay K15 (6) on PDP (2). NOTE Perform steps (6) and (7) on M1084/ M1086/M1088 and M1089. (6) Install circuit breaker CB72 (7) on PDP (2). (7) Install relay K12 (8) on PDP (2). NOTE • Step (8) requires the aid of an assistant. • Install plastic cable ties as required. (8) Position WTEC II dashboard cable assembly (9) in dashboard (10). (9) Install terminal lug TL14 (11) on terminal board TB2 (12) position 12. (10) Install terminal lug TL87 (13) on terminal board TB2 (12) position 6. (11) Remove two nuts (14), lockwashers (15), washers (16), cover (17), and two washers (16) from terminal board TB1 (18). (12) Install terminal lug TL75 (19) on terminal board TB1 (18) position 2. (13) Install terminal lug TL71 (20) on terminal board TB2 (12) position 2. 7-56