TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 781 of 1396
TM 9-2320-366-20-3 7-10. WTEC II DASHBOARD CABLE ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Windshield wiper motor removed (para 18-4). Personnel heater removed (para 18-9). Instrument panel assembly removed (para 7-15). Tools and Special Tools Tool Kit, Auto Fuel (Item 43, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Lockwasher (4) (Item 71, Appendix G) Lockwasher (6) (Item 93, Appendix G) Lockwasher (2) (Item 84, Appendix G) Lockwasher (10) (Item 83, Appendix G) Lockwasher (4) (Item 88, Appendix G) Personnel Required (2) a. Removal. NOTE Remove plastic cable ties as required. Tag wires and connection points prior to disconnecting. (1) Disconnect steering column switch connector J19 (1) from connector P19 (2). (2) Disconnect steering column switch connector P18 (3) from connector J18 (4). (3) Disconnect connector J118 (5) from connector P118 (6). 7-39