TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 770 of 1396
TM 9-2320-366-20-3 7-34 Change 2 7-8. AUXILIARY PANEL REPLACEMENT This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Decal (Item 11, Appendix G) Nut, Self-Locking (2) (Item 131, Appendix G) a. Removal (1) Remove six screws (1) from auxiliary panel (2). (2) Lift auxiliary panel (2) outward from auxiliary panel housing (3) to gain access. (3) Lift tab (4) on connector P904 (5). (4) Disconnect connector P904 (5) from PTO switch (6). (5) Disconnect connector P904A (7) from PTO switch (6). NOTE • Tag electrical connectors and connection points prior to removal. • All rocker switches are removed the same way. PTO switch shown