TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 768 of 1396
TM 9-2320-366-20-3 7-7. STARTING MOTOR REPLACEMENT (CONT) (27) Remove nut (25) from solenoid terminal (26). (28) Position terminal lug TL26 (27) on solenoid terminal (26) with nut (25). (29) Tighten nut (25) to 31 lb-in. (4 N·m). (30) Remove nut (28) from solenoid terminal (29). (31) Position terminal lugs TL12 (30) and TL55 (31) on solenoid terminal (29) with nut (28). (32) Tighten nut (28) to 30 lb-ft (41 N·m). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (33) Apply adhesive on terminal lug TL26 (27), solenoid terminal (26), and nut (25). (34) Apply adhesive on terminal lugs TL12 (30), TL55 (31), solenoid terminal (29), and nut (28). 7-32 Change 1