TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 763 of 1396
TM 9-2320-366-20-3 7-7. STARTING MOTOR REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Cab raised (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Sling, Endless (Item 32, Appendix C) Wrench Set, Socket (Item 51, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Adapter, Socket Wrench (Item 2, Appendix B) Heater, Gun Type, Electric (Item 24, Appendix B) Crowfoot Attachment, Socket Wrench (Item 8, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Adhesive (Item 8, Appendix D) Adhesive (Item 9, Appendix D) Bolt, Machine (3) (Item 2, Appendix G) Gasket (Item 39, Appendix G) Splice, Conductor (Item 261, Appendix G) Tape, Insulation, Electrical (Item 68, Appendix D) Insulation, Sleeving, Electrical (Item 28.1, Appendix D) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Tag wires and connection points prior to disconnecting. (1) Remove adhesive, nut (1), terminal lugs TL55 (2) and TL12 (3) from solenoid terminal (4). (2) Position nut (1) on solenoid terminal (4). (3) Remove adhesive, nut (5), and terminal lug TL26 (6) from solenoid terminal (7). (4) Position nut (5) on solenoid terminal (7). Change 1 7-27