TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 760 of 1396
TM 9-2320-366-20-3 7-6. AUXILIARY STARTER SOLENOID REPLACEMENT (CONT) NOTE Perform steps (3) and (4) on vehicle serial number 7413 and higher, and vehicle serial numbers 0001 through 7412 which have previously had an auxiliary starter solenoid replaced. (3) Remove self-locking nut (10), washer (11), and screw (12) from bracket (13). Discard self-locking nut. (4) Remove self-locking nut (14), washer (15), clamp (16), screw (17), and auxiliary starter solenoid (5) from bracket (13). Discard self-locking nut. NOTE Perform step (5) on vehicle serial numbers 0001 through 7412 which have not previously had an auxiliary starter solenoid replaced. (5) Remove self-locking nuts (10 and 14), washers (11 and 15), screws (12 and 17), and auxiliary starter solenoid (5) from bracket (13). Discard self-locking nuts. b. Installation. (1) Position auxiliary starter solenoid (1) on bracket (2) with screw (3), clamp (4), washer (5), and self-locking nut (6). (2) Position screw (7), washer (8), and self-locking nut (9) in bracket (2). (3) Tighten self-locking nuts (6 and 9) to 96-120 lb-in. (11-14 N·m). 7-24