TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 747 of 1396
TM 9-2320-366-20-3 7-3. ALTERNATOR BELTS REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Gage, Belt Tension (Item 19, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Personnel Required (2) CAUTION Alternator belts must be replaced as a pair. Failure to comply may result in damage to equipment. a. Removal. (1) Disconnect air hose (1) from fan clutch (2). (2) Loosen two screws (3) on front of engine block (4). (3) Move tension bracket (5) up. (4) Remove two alternator belts (6) from pulley (7). Change 1 7-11