TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 719 of 1396
TM 9-2320-366-20-3 Change 2 6-63 6-12. WATER PUMP AND FITTINGS REPLACEMENT This task covers: a. Water Pump Removal b. Water Pump Installation c. Fittings Removal d. Fittings Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions 100 amp alternator removed, if equipped (para 7-2). 200 amp alternator removed, if equipped (para 20-45). Alternator brackets removed (para 7-4). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Container (52 qt (50 L) capacity) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B) Wrench, Adjustable, Automotive (Item 53, Appendix C) Gage, Belt Tension (Item 19, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Antifreeze, Ethylene Glycol, Permanent (Item 12, Appendix D) Packing, Preformed (Item 195, Appendix G) Packing, Preformed (Item 214, Appendix G) Packing, Preformed (3) (Item 205, Appendix G) Packing, Preformed (2) (Item 202, Appendix G) a. Water Pump Removal. (1) Position container under radiator (1). (2) Remove radiator cap (2) from radiator overflow tank (3). (3) Open radiator draincock (4) and drain coolant. (4) Close radiator draincock (4). WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel