TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 710 of 1396
TM 9-2320-366-20-3 6-9. UPPER COOLANT TUBE AND HOSES REPLACEMENT (CONT) WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (12) Apply antiseize compound to threads of water temperature switch (11). (13) Install water temperature switch (11) in upper coolant tube (8). (14) Connect water temperature switch electrical connector (12) to connector P36 (13). (15) Connect connector clamp (14) on water temperature switch electrical connector (12). c. Follow-On Maintenance. (1) Connect batteries (para 7-57). (2) Add coolant to radiator overflow tank (TM 9-2320-366- 10-2). (3) Start engine (TM 9-2320-366-10-1). (4) Check for coolant leaks under vehicle. (5) Remove radiator cap from radiator overflow tank. (6) Check coolant level after normal operating temperature is reached. Add coolant as required (TM 9-2320-366-10- 2). (7) Install radiator cap on radiator overflow tank. (8) Raise cab (TM 9-2320-366-10-1). (9) Check for coolant leaks around hoses and fittings. (10) Lower cab (TM 9-2320-366-10-1). (11) Shut down engine (TM 9-2320-366-10-1). End of Task. 6-54