TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 695 of 1396
TM 9-2320-366-20-3 (10) Position coolant hose (10) on coolant bypass tube (2). (11) Position flow restrictor (12) and coolant hose (10) on transmission oil cooler (13). (12) Engage as many clamp tabs (7) as possible in tab windows (8) allowing little or no play between two clamps (5) and coolant hose (10). (13) Tighten two clamps (5) to 12-18 lb-in. (1-2 N·m). (14) Tighten two clamps (4) to 12-18 lb-in. (1-2 N·m). NOTE Minimum allowable gap on clamp is 0.2 in. (5 mm). If gap is less than 0.2 in. (5 mm), remove and re-install clamp. (15) Measure gap on two clamps (5). Change 1 6-39