TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 690 of 1396
TM 9-2320-366-20-3 6-7. COOLANT BYPASS TUBE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Container (52 qt (50 L) capacity) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B) Materials/Parts Antiseize Compound (Item 58, Appendix D) Antifreeze, Ethylene Glycol, Permanent (Item 12, Appendix D) Nut, Self-Locking (Item 128, Appendix G) WARNING • Coolant may be very hot and under pressure from engine operation. Ensure engine is cool before performing maintenance. Failure to comply may result in injury to personnel. • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Remove radiator cap (1) from radiator overflow tank (2). (2) Position container under radiator (3). (3) Open radiator draincock (4) and drain coolant. (4) Close radiator draincock (4). 6-34 Change 1