TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 678 of 1396

TM 9-2320-366-20-3 6-4. RADIATOR FAN SHROUDS REPLACEMENT (CONT) (15) Install lower coolant hose (20) between radiator (3) and transmission oil cooler (21). (16) Engage as many clamp tabs (18) as possible in tab windows (19) allowing little or no play between clamps (16) and lower coolant hose (20). (17) Tighten two clamps (16) to 12-18 lb-in. (1-2 N·m). NOTE Minimum allowable gap on clamp is 0.2 in. (5 mm). If gap is less than 0.2 in. (5 mm), remove and re-install clamp. (18) Measure gap on two clamps (16). e. Follow-On Maintenance. (1) Install upper coolant tube and hoses (para 6-9). (2) Install charge air cooler to air inlet elbow tubes/hoses (para 4-5). (3) Install turbocharger to charge air cooler tube/hoses (para 4-4). (4) Add coolant to radiator overflow tank (TM 9-2320-365- 10). (5) Check for coolant leaks under vehicle. (6) Start engine (TM 9-2320-365-10). (7) Check for coolant leaks under vehicle. 6-24 Change 1