TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 650 of 1396

TM 9-2320-366-20-3 5-4. TAILPIPE REPLACEMENT (CONT) (3) Remove self-locking nut (4) from clamp (5). Discard self- locking nut. (4) Disconnect tailpipe (3) from muffler (6). (5) Remove clamp (5) from tailpipe (3). (6) Remove two self-locking nuts (7), screws (8), and loop clamp halves (9) from tailpipe (3). Discard self-locking nuts. (7) Remove two self-locking nuts (10), screws (11), and tailpipe bracket (12) from frame (13). Discard self-locking nuts. b. Installation. (1) Position tailpipe bracket (1) on frame (2) with two screws (3) and self-locking nuts (4). (2) Tighten two self-locking nuts (4) to 42-52 lb-ft (57-71 N·m). (3) Position two loop clamp halves (5) and tailpipe (6) on tailpipe bracket (1) with two screws (7) and self-locking nuts (8). 5-14 Change 1