Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 642 of 1396

TM 9-2320-366-20-3 5-2. MUFFLER AND EXHAUST HEAT SHIELDS REPLACEMENT (CONT) (6) Position two muffler straps (3) on muffler (4) with two screws (5) and self-locking nuts (6). (7) Position exhaust heat shield (7) on two muffler support brackets (2) with four screws (8) and self-locking nuts (9). (8) Tighten four self-locking nuts (9) to 25-29 lb-ft (34-39 N·m). NOTE Step (9) requires the aid of an assistant. (9) Install muffler (4) on two muffler support brackets (2) with two rubber grommets (10), four rubber grommets (11), two washers (12), screws (13), washers (14), and self- locking nuts (15). 5-6