TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 634 of 1396
TM 9-2320-366-20-3 4-22. CHECKING AND STENCILING HIGH/LOW HAND THROTTLE POSITIONS (CONT) (5) Position HAND THROTTLE lever (2) so that upper edge of lever is even with line below H setting. NOTE Acceptable engine RPM with HAND THROTTLE lever at H setting is 2000-2200 RPM. (6) Perform STE/ICE-R test #10. (7) Perform subparagraph b. Stenciling High/Low Hand Throttle Positions if engine RPM results from steps (4) and (6) are not within acceptable limits. b. Stenciling High/Low Hand Throttle Positions. (1) Paint over old high and low HAND THROTTLE lever position markings (TB 43-0209). (2) Connect STE/ICE-R to DCA connector (1). (3) Start engine (TM 9-2320-366-10-1). (4) Perform STE/ICE-R test #10. 4-104