TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 627 of 1396
TM 9-2320-366-20-3 (5) Loosen two jam nuts (8) behind ball seats (2 and 6). (6) Remove ball seats (2 and 6) and two jam nuts (8) from threaded rod (3). b. Installation. (1) Install two jam nuts (1) to bottom of threads on threaded rod (2). (2) Install ball seats (3 and 4) on threaded rod (2) until ball seats contact two jam nuts (1). (3) Tighten two jam nuts (1) against ball seats (3 and 4). (4) Apply grease to inside of ball seat (3). (5) Install ball seat (3) in accelerator pedal (5). (6) Install clip ring (6) on ball seat (3). 4-97