TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 616 of 1396
TM 9-2320-366-20-3 4-16. THROTTLE POSITION SENSOR (TPS) CABLE ASSEMBLY REPLACEMENT (CONT) b. Installation. (1) Position TPS cable assembly (1) in clamp (2). (2) Close latch (3) on clamp (2). (3) Position TPS cable assembly (1) on stud (4). (4) Install washer (5) and cotter pin (6) on stud (4). (5) Install TPS cable assembly (1) on bracket (7) with three screws (8), washers (9) and nuts (10). (6) Connect electrical connector (11) to TPS cable assembly (1). (7) Lower cab (TM 9-2320-366-10-1). (8) Connect batteries (para 7-57). NOTE Wait until Neutral (N) indication appears in pushbutton shift selector display before positioning master power switch off. (9) Position master power switch on and off five times (TM 9-2320-366-10-1). NOTE TPS will self-adjust but vehicle will need to be operated through all gear ranges several times before correct shifting will be noticed. (10) Operate vehicle and check for smooth transmission shifting through all gear ranges (TM 9-2320-366-10-1). End of Task. 4-86