TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 614 of 1396
TM 9-2320-366-20-3 4-15. ETHER STARTING AID REPLACEMENT (CONT) e. Ether Valve Removal. (1) Disconnect ether tube (1) from ether valve (2). (2) Disconnect ether valve electrical connector (3) from connector J93 (4). (3) Remove two self-locking nuts (5), screws (6), washers (7), terminal lug TL84 (8), and ether valve (2) from spare tire retainer (9). Discard self-locking nuts. f. Ether Valve Installation. (1) Position ether valve (1) on spare tire retainer (2), terminal lug TL84 (3), two washers (4), screws (5), and self-locking nuts (6). (2) Tighten self-locking nuts (6) to 25-31 lb-ft (34-42 N·m). (3) Connect ether valve electrical connector (7) to connector J93 (8). (4) Connect ether tube (9) to ether valve (1). g. Follow-On Maintenance. (1) Raise spare tire (TM 9-2320-366-10-2). (2) Connect batteries (para 7-57). (3) Operate ether starting aid (TM 9-2320-366-10-2) and check for ether leaks. End of Task. 4-84 Change 1