TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 602 of 1396
TM 9-2320-366-20-3 4-13. FUEL/WATER SEPARATOR AND FILTER REPLACEMENT This task covers: a. Filter Removal b. Filter Installation c. Pump Head Removal d. Pump Head Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Cab raised (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Pan, Drain (Item 24, Appendix C) Materials/Parts Cloth, Cleaning (Item 16, Appendix D) Oil, Fuel, Diesel (Item 36 or 37, Appendix D) Filter Element, Fluid (Item 17, Appendix G) Packing, Preformed (2) (Item 200, Appendix G) WARNING Diesel fuel is flammable. If fuel is spilled, clean it up immediately. Failure to comply may result in serious injury or death to personnel. a. Filter Removal. (1) Disconnect connector clamp (1) from fuel/water separator connector (2). (2) Disconnect connector P33 (3) from fuel/water separator connector (2). (3) Position drain pan under hose (4). (4) Open drain valve (5) and allow fuel to drain. (5) Loosen clamp (6) on hose (4). (6) Remove hose (4) from drain valve (5). 4-72