TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 601 of 1396

TM 9-2320-366-20-3 (2) Install ring spacer (5) in linkage plate (6). d. Installation. (1) Position sensor bracket (1) on governor (2) with washer (3) and bolt (4). (2) Tighten bolt (4) to 9 lb-ft (12 N·m). (3) Position linkage plate (5) on governor (2) with washer (6) and bolt (7). (4) Tighten bolt (7) to 20 lb-ft (27 N·m). (5) Install springs (8 and 9) on linkage plate (5). (6) Install throttle control cable (10) on stud (11) with clip (12). (7) Install TPS cable assembly (13) on stud (14) with washer (15) and cotter pin (16). e. Follow-On Maintenance. (1) Lower cab (TM 9-2320-366-10-1). (2) Operate vehicle and check for proper engine operation (TM 9-2320-366-10-1). End of Task. 4-71