TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 544 of 1396
TM 9-2320-366-20-3 4-2. INTAKE AIR CLEANER FILTER ELEMENT, AIR CLEANER ASSEMBLY, AND PARTICLE EXTRACTION TUBE REPLACEMENT (CONT) (3) Position intake air cleaner assembly (5) on mounting brackets (4). (4) Position washer (6) and screw (7) in resilient mount (3). (5) Position three screws (8) and self-locking nuts (9) in mounting brackets (4). (6) Tighten screw (7) to 40-52 lb-ft (54-70 N·m). (7) Tighten three self-locking nuts (9) to 40-52 lb-ft (54-70 N·m). (8) Position turbocharger intake hose (10) on turbocharger tube (11) with clamp (12). (9) Tighten clamp (12) to 36-48 lb-in. (4-5 N·m). CAUTION Distance between front edge of air duct and alternator fan shroud must be no less than 0.5 in. (1.27 cm). Failure to comply may result in damage to equipment. (10) Position air duct (13) on turbocharger (14) with clamp (15). (11) Tighten clamp (15) to 21-25 lb-in. (2-3 N·m). (12) Position turbocharger tube (11) in air duct (13) with clamp (16). (13) Tighten clamp (16) to 36-48 lb-in. (4-5 N·m). 4-14