TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 530 of 1396
TM 9-2320-366-20-3 Section II. MAINTENANCE PROCEDURES 4-2. INTAKE AIR CLEANER FILTER ELEMENT, AIR CLEANER ASSEMBLY, AND PARTICLE EXTRACTION TUBE REPLACEMENT This task covers: a. Intake Air Cleaner Filter Element Removal b. Intake Air Cleaner Filter Element Installation c. Intake Air Cleaner Assembly Removal (All Models Except M1093/M1094) d. M1093/M1094 Intake Air Cleaner Assembly Removal e. Intake Air Cleaner Disassembly f. Intake Air Cleaner Assembly g. M1093/M1094 Intake Air Cleaner Assembly Installation h. Intake Air Cleaner Assembly Installation (All Models Except M1093/M1094) i. Particle Extraction Tube Removal j. Particle Extraction Tube Installation k. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Chemical detection unit removed, if equipped (TM 3- 6665-225-12). Transmission oil fill tube removed (M1093/M1094) (para 8-22). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 59, Appendix C) Crowfoot Attachment, Socket Wrench (Item 6, Appendix B) Screwdriver Attachment, Socket Wrench (Item 61, Appendix B) Socket Set, Socket Wrench (Item 36, Appendix C) Tools and Special Tools (Cont) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Materials/Parts Rag, Wiping (Item 50, Appendix D) Gasket (Item 31, Appendix G) Filter Element (Item 21, Appendix G) Washer, Spring (2) (Item 291, Appendix G) Nut, Self-Locking (3) (Item 156, Appendix G) Nut, Self-Locking (3) (M1093/M1094) (Item 150, Appendix G) Nut, Self-Locking (3) (all models except M1093/M1094) (Item 157, Appendix G) References TM 3-6665-225-12 FM 3-4 FM 3-5 WARNING After Nuclear, Biological, or Chemical (NBC) exposure of vehicle, all air filters shall be handled with extreme caution. Unprotected personnel may experience serious injury or death if residual toxic agents or radioactive materials are present. If vehicle is exposed to chemical or biological agents, servicing personnel shall wear protective mask, hood, protective overgarments, and chemical protective gloves and boots in accordance with FM-3-4. All contaminated air filters shall be placed in double-lined plastic bags and moved swiftly to a segregation area away from the worksite. The same procedure applies for radioactive dust contamination. The Company NBC team should measure radiation prior to filter removal to determine extent of safety procedures required per the NBC Annex to the unit Standard Operating Procedures (SOP). The segregation area in which the contaminated air filters are temporarily stored shall be marked with appropriate NBC placards. Final disposal of contaminated air filters shall be in accordance with local SOP. Decontamination operation shall be in accordance with FM-3-5 and local SOP. Failure to comply may result in serious injury or death to personnel. 4-2