TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 525 of 1396
TM 9-2320-366-20-3 3-7. ENGINE OIL FILL TUBE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Transmission oil fill tube removed (Para 8-22). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Screwdriver Attachment, Socket Wrench (Item 61, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 36, Appendix C) Materials/Parts Nut, Self-Locking (2) (all models except M1093/M1094) (Item 167, Appendix G) Nut, Self-Locking (M1093/M1094) (Item 167, Appendix G) a. Removal. (1) Remove cap (1) from engine oil fill tube (2). NOTE Perform steps (2) and (3) on all models except M1093/M1094. (2) Remove self-locking nut (3), washer (4), engine oil fill tube (2), screw (5), and washer (6) from radiator overflow tank bracket (7). Discard self-locking nut. (3) Remove self-locking nut (8), washer (9), engine oil fill tube (2), screw (10), and washer (11) from front lifting beam (12). Discard self-locking nut. 3-19