TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 520 of 1396
TM 9-2320-366-20-3 3-5. CRANKCASE BREATHER REPLACEMENT (CONT) b. Installation. (1) Apply a thin coat of lubricating oil to both sides of preformed packing (1). (2) Install preformed packing (1) on fuel filter base (2). (3) Position crankcase breather housing (3) on fuel filter base (2) with washer (4) and screw (5). (4) Tighten screw (5) to 96-144 lb-in. (11-16 N·m). (5) Position hose (6) on crankcase breather housing (3) with clamp (7). (6) Tighten clamp (7) to 35-45 lb-in. (4-5 N·m). c. Follow-On Maintenance. (1) Lower cab (TM 9-2320-366-10-1). (2) Start engine (TM 9-2320-366-10-1). (3) Check for oil leaks under vehicle. (4) Raise cab (TM 9-2320-366-10-1). (5) Check for oil leaks around breather housing gasket. (6) Lower cab (TM 9-2320-366-10-1). (7) Shut down engine (TM 9-2320-366-10-1). End of Task. 3-14