TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 519 of 1396
TM 9-2320-366-20-3 3-5. CRANKCASE BREATHER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Materials/Parts Rag, Wiping (Item 50, Appendix D) Packing, Preformed (Item 207, Appendix G) Oil, Lubricating, OE/HDO 30 (Item 45, Appendix D) a. Removal. CAUTION Wipe around fuel filter base before removing crankcase breather housing. Failure to comply may result in damage to equipment. (1) Loosen hose clamp (1) on hose (2). (2) Remove hose (2) from crankcase breather housing (3). (3) Remove screw (4) and washer (5) from crankcase breather housing (3). (4) Remove crankcase breather housing (3) from fuel filter base (6). (5) Remove preformed packing (7) from fuel filter base (6). Discard preformed packing. 3-13